BlackWing MK 2013 Bedienungsanleitung PDF herunterladen (Seite 21)

Section 4.1.8

Control Box (Front View)

The above illustration shows the front panel of the Control Box. The motor is controlled using

the front panel touchpad. The power button turns the front panel on/off (once the master

power button is turned on – located in the rear of the Control Box). Two buttons are used to

control the adjustment of the speed of the motor (press and hold down to quickly adjust the

motor speed), while two more buttons are used to control the direction (forward or reverse).

LEDs are present on the front panel to indicate the direction that the motor will travel once the

motor is engaged. To engage the motor, your thumb must be placed inside the thumb-switch

(highlighted red). Removing your thumb from this switch will instantly disengage the motor.

This thumb-switch system was chosen as a safety feature to prevent the scanner from

somehow breaking away from the operator and colliding into another object. Two digital

displays are present on the front panel. One keeps track of the power supply voltage for the

motor (Battery Box #2), while the other displays the motor speed (represented as a percentage,

ranging from 00 to approximately 97). Since a stalled motor generates a significant amount of

back current, the lower speed percentages have been curved upward (00% speed value does

Motor Lift Assembly Lever

Thumb-Switch (Place thumb

here to engage motor –

Remove thumb to disengage)

Power Button – Only works when

Master Power Switch is On

(Located on rear of Control Box)

Digital Display for

Motor Speed

Digital Display for

Power Supply Voltage

(for Motor – Battery

Box #2)

Motor Direction Buttons

(Up – Forward, Down – Reverse)

Motor Speed Adjustment Buttons

(Up-Increases Speed, Down-

Decreases Speed)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 72 73

Keine Kommentare

BlackWing MK 2013 Bedienungsanleitung Seite 21