BlackWing MK 2013 Bedienungsanleitung PDF herunterladen (Seite 11)

Section 4.1.2

Sensor Bar

The sensor bar is captured in the above illustration. Notice that the magnet bridge assembly is

almost completely transparent so that the sensor can be clearly seen. The 24-pin connector

(highlighted in red) is a connection point for the signal cable (which is also connected to the 24-

pin connector on the Electronics Box as illustrated in Section 4.1.3).

The sensor bar contains an array of sensors across the full width of the scanning head. These

sensors detect the leakage fields generated by the inspection process. It is suspended and

spring mounted within the magnetic bridge by six studs. Two of the studs use wing nuts

(highlighted blue in the above illustration) to quickly adjust the height of the sensor bar from

the inspection surface. The remaining four studs are simply there to better stabilize the sensor

bar while in operation.

Wing Nut

(Blue)

24-Pin Connector

(Red)

Sensor Bar

(Solid Gray)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 72 73

Keine Kommentare

BlackWing MK 2013 Bedienungsanleitung Seite 11